You can pair your Envision Glasses with the Envision App by following these simple steps:

1. Install Envision App
2. Login to Envision App
3. Turn on your Envision Glasses
4. Pair Envision Glasses with the Envision App
5. Unpairing the Envision Glasses

Install Envision App

Envision is a free app that can be installed from the App Store on iOS or Play Store on Android. Here are the links for both of them:

• Download for iOS
• Download for Android

Login to Envision App

To get started with the Envision Glasses, log in to the Envision App. If you don’t have an account yet, an account will be created for you. You can sign up by using your email or other methods. Keep in mind that Envision App requires mobile data or Wi-Fi for general operation, even if the features are offline.

Turning on your Envision Glasses

Now that your frame is attached to the body, let’s turn on the Envision Glasses! You can do so by holding the power button for 6 seconds. The power button is located on the rear end of the glasses on the right side, next to the charging port, on the inside surface. After you have pressed the power button for 6 seconds, please take into consideration that it takes about a minute for the device to boot up, and there is no audio cue during this process. You will know the Envision Glasses are on when they start speaking out on the start screen. The first time you turn the device on, the glasses will speak out a request to 'Go to EnvisionGlasses.com'.

‍

Here's a quick video that explains the steps:

If the Envision Glasses are not turning on, try charging them with the fast-charging USB-C cable that is provided in the box. This will not only charge your Envision Glasses, but it will also make sure they get powered on.

Note: Keep in mind that your Envision Glasses will automatically turn on when you unfold them and when you connect them to the power cable.

Pair Envision Glasses with Envision App 

When your Envision Glasses are powered on and it will continuously speak out to 'Go to EnvisionGlasses.com'. This means the device is on, but not paired with the smartphone, yet.

To start pairing your Envision Glasses with your Envision App, complete the following steps:

Step 1: Open the Envision App.

Step 2: Navigate to the Glasses tab.

Step 3: Tap on Pair Envision Glasses, and a pop-up will appear.

Step 4: Tap on Start Pairing Process.

Step 5: Complete the steps shown on the app, this includes pairing the app and connecting to a Wi-Fi network.

Step 6: In the last step the device is paired with the app and connected to Wi-Fi.

Step 7: Tap on Continue.

Step 8: Switch to your Envision Glasses, the Gestures Introduction Training will start for you when it is the first time you are using the glasses.

For Android Users

If you have an Android smartphone, Location and Privacy settings on your phone need to be enabled in the Envision App in order to pair the glasses. To enable location, follow the steps here.

In some cases, it is also necessary to reset your phone's Bluetooth cache. Here's how:

Step 1: Open Settings, and then tap on the option called Apps.
Step 2: Tap on the Sort icon, located at the top right with three vertical dots, then tap on Show System Apps or Show System Processes. When this option is selected, all the system apps will appear in a list.
Step 3: Tap on the Search Bar and type and select Bluetooth, then select the option Storage and select the Clear Data option.
Step 4: Tap on Delete and make sure Location is enabled for the Envision App. To enable location, follow the steps here. Now your smartphone is ready to be paired to your Envision Glasses

You can check the video below about how to pair the Envision Glasses with the Envision App:

‍

At this point, you will go through the introductory tutorial on Envision Glasses. You will first be taught where the touchpad is located, afterwards, you will learn about the swipe and tap gestures.

‍

Unpairing the Envision Glasses

If you want to pair your glasses with a different device, you can follow the steps below.

Step 1: Make sure that the Envision App has been unpaired from the glasses by going to the Glasses tab, selecting Settings, and tapping on Unpair Envision Glasses. 

Step 2: Set the glasses into Pairing Mode. You can do this on the glasses by going to the main menu, navigating through the menu by swiping forward with one finger until you reach Settings, and double-tap with one finger on the Pairing Mode option. 

Step 3: To confirm that your glasses are in pairing mode, you will hear go to 'Go to EnvisionGlasses.com', in multiple languages. 

Step 4: Your device will now be ready to be paired with another Envision account on Envision App.