The power button and touch bar are both located on the right side of your Ally Solos Glasses.

Please find more information below on how each one operates:

Power Button

The power button is a small, subtle bump between your temple and your ear, located before the touch bar area.

It is not a raised or clicky button, it is slightly indented so you can easily feel it with your finger.

To turn on your Ally Solos Glasses, press and hold the power button while keeping your finger steady in place.

You will hear the following sounds in order:

After about 2 seconds: A short beep confirms that the Ally Solos Glasses have detected your touch.
After about 5 seconds: The Ally Solos Glasses will say ‘Power High’, meaning the device has successfully turned on and that the battery level is strong. The message may vary depending on your current battery charge. Once your Ally Solos Glasses have been paired, you will be able to check the exact battery percentage directly within the Ally app.
After about 7 seconds: You will hear Pairing, confirming that your Ally Solos Glasses are ready to be paired. Once you hear Pairing, you can release the power button. For detailed steps on how to pair them, please see Start pairing your Ally Solos Glasses within the Ally app

Touch Bar

The touch bar is located on the right temple, behind the power button. You can use it to control Ally and manage audio hands-free.

To start a conversation with Ally, double tap the touch bar.
To talk to Ally in Walkie-Talkie mode, press and hold your finger on the touch bar while you speak, then release it when finished.
To end a conversation, triple tap the touch bar.
To increase the volume, swipe your finger backward, toward your ear.
To decrease the volume, swipe your finger forward, away from your ear.

You can adjust the touch sensitivity in the Ally app under Advanced Features.
Move the slider to the left for higher sensitivity, which responds to lighter taps.
Move the slider to the right for lower sensitivity, which requires firmer taps.